We permanently eliminate vaping and e-cigarette smells from London properties using a comprehensive multi-stage process β specialist chemical treatment, ULV fogging and monitored ozone treatment.
Vaping is widely perceived as cleaner than tobacco smoking β and in many respects it is. However, the aerosol produced by e-cigarettes and vape devices deposits a distinctive chemical residue on every surface it contacts. Over time, this creates a persistent, sweet or chemical odour that is surprisingly difficult to remove.
E-cigarette aerosol contains Vegetable Glycerin (VG) and Propylene Glycol (PG) as base chemicals, along with flavouring compounds, nicotine (in nicotine-containing liquids) and various volatile organic compounds. Unlike tobacco smoke, vape aerosol is not visible as it settles β making the contamination harder to detect until the odour becomes established.
The VG and PG residue is oily and adhesive. It settles on walls, ceilings, curtains, carpets and soft furnishings, creating a layer that continuously off-gasses flavour and chemical compounds back into the air. Sweet or fruity vape flavours can create particularly distinctive odours that prospective tenants and buyers immediately notice.
Many landlords and property managers are surprised by how noticeable vape odour is in a vacated property. Because vaping seems innocuous during occupation, the accumulation of aerosol residue is rarely monitored. By the time the property becomes vacant, months or years of aerosol deposition may have built up on surfaces throughout.
Standard cleaning removes surface deposits but cannot fully break down chemical compounds that have penetrated into wall paint, carpet fibres, wooden surfaces and soft furnishings. Ventilation reduces the smell temporarily but the residue continues to off-gas regardless of airflow.
Based on our experience, the best results come from a staged professional approach: specialist surface treatment first, followed by ULV fogging to reach fabrics and air spaces, and finishing with monitored ozone to neutralise what remains. Each stage addresses a different layer of contamination.
Vape odour responds best to a staged professional approach. The VG/PG aerosol residue must be chemically treated and addressed at surface level before fogging and ozone stages can fully neutralise what remains.
Based on our experience treating hundreds of London properties, vape odour responds best to a staged process. We begin with specialist surface treatment to address the VG/PG aerosol residue, follow with ULV fogging to reach soft furnishings and air spaces, then finish with monitored ozone treatment. This comprehensive approach consistently delivers the best and most lasting results.
We assess the extent of aerosol contamination, identify heavily affected rooms and surfaces, and recommend the appropriate treatment package. Honest advice always β we will tell you what to expect before work begins.
All affected hard surfaces β walls, ceilings, woodwork, skirting boards β are treated with specialist degreasers and odour-removal chemicals formulated to break down VG/PG and flavour compounds. In heavier contamination cases, surfaces are physically wiped down by hand.
Specialist odour-neutralising solution is applied as a fine mist using a ULV fogger. The mist penetrates soft furnishings, carpets, curtains, mattresses and air spaces β reaching vape residue that cannot be accessed by surface treatment alone.
Industrial ozone generators are deployed throughout the property. We monitor Oβ concentration in real time to verify effective levels are reached and maintained. Ionisation provides final air purification, removing residual VOC particles and odour molecules.
The property is thoroughly ventilated. Safe re-entry conditions are confirmed and aftercare guidance provided to protect results long-term.
Most ozone operators place a machine and leave β no surface treatment, no fogging, no measurement. Our process is fundamentally different. Chemical treatment and fogging prepare the property, then ozone is applied and monitored in real time to verify effective concentration throughout every room.
We treat all affected hard surfaces with specialist degreasers before any fogging or ozone β breaking down the VG/PG residue that is the primary source of vape odour.
Our cold-fog equipment delivers specialist neutraliser into soft furnishings, carpets, curtains and air cavities β reaching aerosol deposits that surface-only treatment cannot access.
We measure Oβ concentration throughout treatment with professional instruments. You receive confirmation that effective levels were reached β not an assumption.
If aerosol contamination has penetrated deeply into structural materials or porous surfaces, we will advise you honestly before any work begins. We never oversell results.
Every vape odour job follows our full staged process. Our comprehensive staged process consistently delivers the best results for established vape odour contamination.
| Sprays & DIY Methods | Professional Treatment | |
|---|---|---|
| Removes odour source | β Masks temporarily | β Eliminates at source |
| Surface penetration | β Surface only | β Deep penetration |
| Chemical residue | β Leaves fragrance | β No masking agents |
| Duration of effect | β Days at most | β Long-lasting |
| Soft furnishings | β Cannot reach deep | β ULV fogging penetrates |
| Proven effectiveness | β No way to verify | β Monitored & documented |
The right approach depends on the extent of vaping and how long aerosol residue has been accumulating. We always recommend the most appropriate package honestly.
For light vape odour where occasional vaping has occurred and hard surfaces have already been cleaned. Suitable where VG/PG residue buildup is minimal and the property has been recently vacated.
Our most popular package for established vape odour. Combines specialist degreasing surface treatment to remove VG/PG residue with ULV fogging and industrial ozone treatment with real-time monitoring.
Full remediation for heavily vape-contaminated properties where aerosol residue has built up significantly. Includes manual cleaning of all surfaces, specialist chemical treatment, ULV fogging, ozone and ionisation.
The effectiveness of vape odour removal depends on how extensively aerosol has penetrated building materials. Where VG/PG residue has soaked into porous surfaces such as bare plaster, unfinished wood or ceiling tiles, treatment may reduce but not fully eliminate the odour without additional remedial work. We will always provide an honest assessment before any work begins.
In the majority of cases, yes β provided the contamination is properly addressed at every layer. Our multi-stage process (surface chemical treatment, ULV fogging, ozone and ionisation) is designed to eliminate vape odour permanently. The key variable is how deeply the VG/PG aerosol has penetrated building materials. We will always advise you honestly before any work begins.
Vape aerosol contains VG and PG β oily, adhesive base chemicals that settle on every surface and continuously off-gas flavour compounds back into the air. Because the aerosol is nearly invisible as it deposits, contamination builds up unnoticed. Standard cleaning removes surface deposits but cannot break down compounds that have penetrated paint, carpet fibres, soft furnishings and woodwork. Ventilation is ineffective β the residue off-gasses continuously regardless of airflow.
Based on our experience treating vape-contaminated properties across London, the best and most lasting results come from addressing the contamination in stages. Vape aerosol deposits VG and PG residue on surfaces, which responds well to specialist surface treatment. ULV fogging with specialist neutraliser then reaches fabrics, curtains and air cavities. Ozone treatment as a final stage neutralises residual compounds throughout the property. Together, these stages deliver results that a single-method approach typically cannot match.
Treatment duration depends on property size and contamination level. The Essential package for a single room or lightly affected flat typically takes 4β6 hours. The Advanced package for a 2-bedroom property generally takes 8β16 hours. The Complete package, which includes manual surface cleaning, may require 1β2 days. We will provide a clear timeframe during your free consultation.
Yes β landlord work is a core part of what we do. We regularly treat properties at the end of tenancies where indoor vaping has occurred, preparing them for viewings, new tenants or sale. We can provide documentation of the treatment carried out for your records. Same-day and next-day appointments are available across London Zones 1β6.
When our full staged treatment is carried out correctly, results are typically excellent and long-lasting. In some cases β where aerosol has penetrated deeply into porous materials β a second treatment or additional remedial work may improve results further. We will always advise you honestly about what to expect before any work begins.
Cost depends on property size, number of affected rooms and severity of contamination. As a guide: Essential treatment from Β£390, Advanced (surface treatment + fogging + ozone) from Β£595, Complete remediation from Β£850. Contact us for a free, no-obligation quote based on your specific situation.
Yes, when carried out correctly. All people, pets and plants must vacate the treated area during ozone treatment. Once treatment is complete and the property is ventilated, ozone reverts to ordinary oxygen and the space is completely safe to re-enter. We provide clear pre- and post-treatment safety instructions for every job.
Describe your situation β we will give you an honest recommendation and a no-obligation quote. Vape contamination varies significantly and we will always advise the right approach for your property.
π 07908 723 553 Request a Free Quote →Tell us about your property and the extent of vaping contamination. We will respond promptly with an honest assessment and a tailored quote.
Prefer to speak with us directly?
07908 723 553